These offer sails are held by Pryde Group, please call to check availability and delivery times. Last checked 02/08/24

The Neil Pryde Atlas wave sail range is designed to cover lighter weights that like a super stable sail which has power set above the boom, which also aids getting heavier sailors up and going as early as possible. Add to that a choice of constructions to suit most sailors and the job is done!.  The Atlas Pro uses the most advanced sail cloths, hence it is the lightest sail in the range but that does not mean it's not tough.. you pay more to have less! Then there is the Pro HD which combines the Pro panel work with slightly heavier HD X ply window, which you do pay a little more for, oddly enough. Finally the HD version, which is a little heavier that the Pro sails but has just as much fun in every square meter you pay for!  See the construction comparison image for more info. Pryde say...

 Superb early planning combined with controllable power, stability, upwind performance and high wind control make this a favourite sail for onshore conditions and / or heavier sailors. 5 battens for ultimate performance. Atlas will allow you to blast over whitewater and jump higher than ever while still feeling soft enough to perform well on the waves when conditions allow.

Drive & Acceleration. Tight leech provides power for early planing and upwind performance.

Wide Wind Range. A large tuning range that allows the rider to trim the sail for all conditions, thanks to the combination of a pronounced luff curve in the boom area and a high outhaul tension that stabilizes the profile. 

Stability. Greater luff curve than the Combat and Zone to provide ultimate high wind control. Five batten layout to provide greater stability and lighter feeling. 5 battens for ultimate performance. Atlas will allow you to blast over whitewater and jump higher than ever while still feeling soft enough to perform well on the waves when conditions allow.

ATLAS PRO Colour: C1 Blue - ATLAS PRO HD Color: C2 Orange - ATLAS HD Colour: C3 Berry

POWERFUSE 2.0. Powerfuse clew and tack are our “signature” fully laminated radial overlapping internal panels used in PRO and PRO-HD constructions. The 2023 version is redesigned to be lighter in weight compared to previous Powerfuse generations. The unique feature of Powerfuse construction (also shared with Radial HD panels) is how the internal panels are cut and placed in a radial overlapping pattern creating a very strong, multiple layer laminate at high load points (tack and clew) and then gradually reducing the number of overlapping layers to distribute the loads progressively into the main sail body.

See Description 2 for specs.