The Titan Pump. The Original Titan Pump. The world’s first purpose built, double chamber SUP pump - designed to cut the amount of time and effort it takes to inflate you board by half. Constant innovation meant we have tested the absolute boundaries of inflation technology and as such are confident there is nothing quite like the Titan pump. What’s more, it now comes with attachments to enable you to inflate anything from boards, to kites, airbeds and boats! We prefer spending our time paddling rather than pumping so we developed the Titan Pump. The Dual Cylinder system (switched by removing a plug from the handle assembly) reduces  the time required to inflate your board. It puts the volume into your board faster and reduces the effort required to reach a higher pressure.

The Titan 2 Pump  So much better.. but more expensive! The double chamber SUP pump that is now an amazing piece of kit. It's designed to cut the amount of time and effort it takes to inflate your board by half and in an ergonomic fashion. Constant innovation has led to us testing the absolute boundaries of inflation technology and as such, we're confident that there's nothing quite like the Titan II pump on the market. The new in line Dual Cylinder system, combined with the updated Hi Flo top chamber means you are in complete control of the energy used to inflate your board (the pump stays put, the harder and faster you pump). As with the Mk1, It puts the volume into your board faster and reduces the effort required to reach a higher pressure.

Note. This pump inflates an iSUP faster than any other pump we sell, including the STX electric 20psi battery powered (which is no slouch).

Titan 1 spare Hose.

Titan 2 Spare Hose.

Schrader / Car valve inflation adaptor. Schrader Valve connector easily enables you to connect most electric compressors. Just attach the adaptor to the valve on your board, then attach the compressor to the adaptor and turn on. Please ensure that you stay with your board at all times during inflation to ensure that you stay within the recommended psi range of 18-22psi. Our Schrader Valve Adaptor will work with electric 12v car pumps and as a rough estimate can take anywhere between 10-20 minutes to inflate. NOTE! This may damage your auxillary socket (cigar lighter) operated car tyre pump or blow the vehicles fuse!  We advise using the adaptor with an air compressor, as per the type which can normally be found at your local garage to inflate your car tyres.

Multi Pump adaptor.  Spend more time on the water by connecting two pumps to one board for fast inflation. Save time and energy on inflation, boost your electric pump to get boards to pressure in record time. Easily dissembles with no tools required, two non-return valves can be maintained without needing extra parts. Compatible with all HR valve fittings so will fit any inflatable SUP

Valve adaptor set to convert the SUP pump for use with Boats / Kites /Wings.