DING ALL Epoxy and Sun Cure Polyester Repair Kits

DING ALL Epoxy and Sun Cure Polyester Repair Kits

See the product Video below Describing Differences between each Ding All and Sun Cure Repair Kits 

Standard Ultra Clear 2 pack Epoxy Resin Kit (can be used on Polyester boards)

Ding All's Standard Epoxy Resin Ding Repair Kit works for both Epoxy and Polyester Ding repairs when UV light is NOT present and fiberglass cloth is needed.

This kit contains Ultra Clear, SS 2000 resin that is used in Epoxy surfboard construction. The resin is dual purpose, and can also repair polyester surfboards. The kit comes complete with the following materials to allow an easy method for small or medium surfboard repairs. 

Epoxy Working time is approx. 30 minutes. Full cure in 6 to 8 hours at 77 degrees F.

NOTE: Use 1/4” Layers of Filled Epoxy resin to fill larger holes or voids to avoid resin overheating.

View video

Product tabs

  • Description 2

    Kit Includes:

    x1 - 2 oz. (56 ml). Ultra Clear Epoxy Resin Plus 1 oz. (28ml). Hardener - Non-Yellowing

    x1 - 15cm x 34cm Fiberglass Cloth patch

    x1 - 2 Sided Sanding Pad (1 side Smooth (120 grit) ,1 side Rough- (80 grit) For easy sanding.

    x1 - Measuring Cup Note: cup can be re-used after popping out hardened resin from previous repair

    x3 - Application/Mixing Sticks 

    x1 - Cover Sheet Note: this is used to cover small dings to make super smooth finish once hardened. Just peel off.

    Easy Instructions.

    Sun Cure Polyester Repair Kit (cannot be used on Epoxy boards)

    Ding All’s Original repair kit re-born with SunCure UV cure resin!

    This kit is now the standard for most small to medium polyester Ding repairs when UV light is present and fiberglass cloth is needed. This kit contains Ultra Clear Silmar UV resin, used by most all polyester surfboard manufacturers.

    Kit Includes: 

    x1 - 2oz. Ultra Clear SunCure Resin - Non-Yellowing

    x1 - 15cm x 34cm Fiberglass Cloth patch

    x1 - Sanding Pad (2 grade - Smooth 120 grit / Rough 80 grit)

    x1 - Measuring Cup (Cup is used for mixing chopped cloth to the resin to make a filler for small dings)

    x3 - Applicator/Mixing Sticks 

    x1 - Cover Sheet + tape stickers (Used to tape over small filler repairs for a smooth surface, after 5 minutes sun exposure)

    Easy Instructions

£0.00
£17.99
Earn 0Reward points

QTY

Do you want to be notified when this product is back in stock? Complete the form below and we'll let you know when it is.